安徽庐枞盆地泥河玢岩型铁矿床地质-原生晕地球化学找矿模型   总被引：1，自引：1，他引：0  

张赞赞  张舒  吴明安  写熹  吕博  魏国辉 《矿床地质》2020,39(2):305-325

开展长江中下游地区玢岩型铁矿床轴向原生晕地球化学分析及建模,可弥补地球物理勘探结果的多解性及探测精度的局限性,对定位和评价深部盲矿体具有至关重要的作用。文章在以往研究的基础上,开展庐枞盆地泥河玢岩型铁矿床钻孔原生晕的研究工作,采用多元统计分析方法,查明了主要成矿指示元素在不同地质体中的富集和亏损,确定了磁铁矿、硫铁矿和硬石膏矿体的矿中、近矿及远矿指示元素组合,结合矿床成因模型,建立了泥河玢岩型铁矿床地质-原生晕地球化学找矿模型,通过罗河和小包庄玢岩型铁矿床的佐证,认为该模型可以应用于长江中下游成矿带玢岩型铁矿床的勘探工作中。  相似文献   

水岩作用下泥质板岩软化非线性机制研究     

黄智刚  左清军  吴立  陈福榜  胡圣松  朱盛 《岩土力学》2020,41(9):2931-2942

水岩作用下泥质板岩表现出明显的软化特征。通过单轴压缩试验分析了泥质板岩软化过程中单轴压缩强度、弹性模量和泊松比与吸水时间之间的关系；借助核磁共振试验研究了水岩作用下泥质板岩软化过程中孔隙的产生、扩展和贯通规律，分析了泥质板岩软化过程中孔隙度与吸水时间之间的关系；采用电镜扫描试验分析了水岩作用下泥质板岩软化过程中微观结构的演变规律，基于分形理论研究了不同浸泡时间下泥质板岩分形维数的变化规律；运用非线性动力学理论，选取微观结构孔隙形状分维值、孔隙度、单轴抗压强度、弹性模量作为描述泥质板岩与水溶液相互作用系统的变量，建立了水岩作用下泥质板岩的软化模型，结合试验数据验证了模型的适用性。结果表明：泥质板岩单轴抗压强度、弹性模量随吸水时间增大而减小，呈负线性相关，而泊松比与吸水时间之间的关系不明显；在浸泡初期，水岩作用强烈，泥质板岩内部微孔隙会发生扩展贯通进而形成更大尺寸的孔隙，孔隙度在浸泡初期增长较快；随着浸泡时间的延长，水岩作用减弱，孔隙度增长速率趋缓；随着吸水时间的推移，泥质板岩内部孔隙相互连通，进而形成复杂网状结构的大孔，泥质板岩分形维数呈对数增长，最终趋于稳定；采用非线性模型计算的结果与试验数据较接近，说明泥质板岩的软化过程具有明显的非线性动力学特征，利用非线性动力学模型可以较好地表征水岩作用下泥质板岩的软化规律。研究成果可为软岩?水相互作用理论研究提供参考。  相似文献   

保国寺大雄宝殿抗震性能分析及加固对策探讨     

陆函  张蓓蕾  彭骁  符映红 《防灾减灾学报》2020,(1):6-12

通过对保国寺大殿结构振动特性现场测试,得到大殿时程分析和频谱分析,结合建筑结构、材料以及使用现状,建立有限元分析模型,并用模态分析验证该建模的真实性。结合宁波地区场地条件,通过该有限元模型在不同烈度地震作用下的反应,评定地震破坏程度。根据现场调查及模型分析结果给出保国寺大殿维护与加固建议。  相似文献   

采坑型滑坡地质力学模式研究--以贵州省福泉滑坡为例     

王小明  史文兵  梁风  马文鹏 《防灾减灾学报》2020,(1):13-19

福泉滑坡具有顺倾上硬下软的结构特征,采用颗粒流离散元模拟采动滑坡的变形破坏全过程,研究福泉滑坡在露天开采条件下变形破坏的地质力学模式。基于颗粒流离散元程序,引入平行粘结模型,通过参数标定确定细观参数与宏观力学性质的关系,据此建立斜坡模型,模拟斜坡采动过程中的变形破坏全过程,确定该类采动滑坡形成的地质力学模式;研究滑坡滑动过程中的速度和能量变化以及堆积特征。研究表明:斜坡采动过程中,潜在滑面顺层滑移,后缘拉裂,裂纹从下往上向软弱面拓展,前缘坡脚处岩体形成锁固段,斜坡出现由前缘至后缘缘递减的蠕滑变形,随着斜坡进一步采动,锁固段发生剪切破坏,前缘坡体启动,中后部裂缝贯通—滑移,斜坡整体失稳破坏,形成牵引式采动滑坡,该类滑坡形成的地质力学模式可分为:滑移—拉裂—剪断3个阶段;对滑坡运动过程的模拟可知,采坑积水是小坝组受灾的关键转化因子。  相似文献   

New formulae for capacity energy-based assessment of liquefaction triggering     

Yasaman Jafariavval 《Marine Georesources & Geotechnology》2020,38(2):214-222

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

基于纵横波保幅分离的粘弹介质弹性波正演模拟     

侯志强  尹文笋  李键  孙永壮  刘云 《中国海洋大学学报(自然科学版)》2020,(1):82-92

地下介质往往表现为粘弹特性,研究基于粘弹假设的数值模拟方法对于正确认识地震波的传播规律和提高地震勘探精度具有重要意义。波动方程正演过程中纵横波的保幅解耦是研究准确的粘弹介质中地震波传播机理的前提,基于散度和旋度算子的纵横波解耦方法会使波场的相位和振幅产生畸变,且解耦后的波场在极性反转位置上无法与分离前混合波场各分量对应。在散度和旋度算子上再做一次梯度和旋度运算的波场分离方法虽然能够克服上述缺陷,但存在保幅性差等问题。本文从粘弹介质中的一阶速度-应力方程出发,推导了矢量纵横波分离的波数域表达式,结合有限差分思路给出了其在空间域的求解方法。本文方法利用纵横波的传播速度对现有的矢量波场分离方法进行振幅校正,并将校正结果分别作为纵波与横波对时间的二阶偏导,实现了粘弹介质中的纵横波分离。模型试算结果表明,本文方法能够克服现有方法的缺陷,获得更具保幅性的波场分离结果。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Experimental investigation of tsunami bore impact pressure on a perforated seawall     

《Applied Ocean Research》2019

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.  相似文献